Sargent And Greenleaf FAS 6990-166
Changeable Key Lock 9 Lever (X-Ray Proof) Vds 3 - Class C
NOTE: This new 6990-166 lock is the replacement for the now discontinued Fas lock 6890-166.
The new 6990-166 lock has been created to meet the Swedish Standard SS-3880
Lock bolt retraction and extension is controlled directly by turning the key.
- Drilled & tapped bolt.
- No combinations or complicated dialling directions to remember.
- Key operated safe locks can be opened faster than combination operated locks.
- Keys are available in various lengths to accommodate different safe door thicknesses.
- Disabling old keys and setting the lock to new keys is accomplished without disassembling the lock, and takes less than 30 seconds without special tools or knowledge.
Nine opposing brass lever design (depending on the particular model) for extra security and increased resistance to picking. Key retaining design ensures the safe is securely locked whenever the key is removed from the lock. Same size and mounting footprint as other standard S&G locks, allowing for easy retrofit without the need for boltwork or mounting screw location changes.
Extruded aluminum guide tube makes it easy to insert the key through thick safe doors, and it helps keep dust and dirt out of the lock.It requires a 5/8 inch (0.625" or 15,9 mm) hole through the safe door and an escutcheon. Two different styles of key hole escutcheons to help align the key properly when inserting it into the lock. The escutcheons also make the front of the safe more attractive. A normally open/normally closed switch equipped model is available to report when the lock is opened or closed, or it can be used as a safe alarm circuit shunt.VdS 3 - Class C
Fulfills Swedish Standard SS-3880